Trigon ADVANCE - phono amplifier for MM and MC systems with integrated battery power supply and external (charger) power supply. Pure battery power when ADVANCE mains interference to the sensitive phono signals and allows uncontrolled technical natural music reproduction.



TRIGON Vanguard II – Phono stage for MM and MC systems. Externally accessible dip-switches allow perfect matching of gain, impedance and capacitance to suit a wide range of phono cartridges. Its external power supply allows to install the Vanguard II phono stage near the turntable, maintaining a short and direct signal path while minimizing interference. 



Trigon Volcano III – optional micro-processor controlled battery supply for Trigon phono stages Vanguard I and Vanguard II.
The Volcano III is a logical upgrade for all Trigon Vanguard I and Vanguard II phono stages that does not require any technical modifications – the upgrade can be installed by the user in a few moments.

Ayon Spheris Phonostage


“State of the art”
The Spheris – Phonostage is designed to be the new reference standard in vacuum-tube phonostage pre-amplification, and for audiophiles who will accept nothing less than simply the best. It is a marvel of engineering with its unique tube circuit design and construction. This preamplifier sets a new standard for natural musical performance with its extraordinarily wide bandwidth, extremely low distortion, colorful, superior dynamic range and an airy three-dimensional holographic soundstage.

The external Spheris AC~ Regenerator offers stable, regulated and purified AC power regardless of the incoming AC line quality. This power supply provides a lowered noise floor, more liquidity, better spatial three-dimensional imaging, greater focus, richer colors and no glare & haze.

Luxman E-250 MM / MC Phono Amplifier


The E-250 is the latest generation of phono equalizer amplifier from LUXMAN, inheriting the best in design from its predecessor the E-200 that has been the reference model for compact phono equalizer amplifiers since it was released in 2008.

The outstanding functionality of the E-250 is such that load impedance and load capacity can be selected according to the cartridge characteristics for the ultimate enjoyment of the original detail of analog reproduction. The E-250 allows the listener to adjust the fine settings for every performance, releasing the expression engraved in the grooves and creating a hitherto unknown musical impression.

Luxman EQ-500 MM / MC Valve Phono Amplifier


The joy of analog reproduction is the indulgence of the harmonic density and tonal character of vinyl playback, faithfully reproducing sound vibration and resonance inscribed on analog records without interruption.

The EQ-500 phono equalizer amplifier is a vacuum tube design for all stages to provide the ultimate experience in the expressive and colourful reproduction of music. Fine adjustment and switching functions that are easily accessible on the elegant front panel allow you to enjoy the real pleasure of analog reproduction.

The debut of LUXMAN\'s masterpiece phono equalizer amplifier, the EQ-500, brings a new dimension that offers an extensive menu of the finest details of analog reproduction allowing you to recreate that ideal sound from your memory.

Vitus Audio RP-102 Phono Stage (MM/MC)


The sun reflects in the shiny rims. For a brief moment you\'re blinded. The sheer firmness, stability and power that they radiate is exceptional. 21 inch wheels transduce the engine output of the rubber that tames the road. When accelerating, the generated torque puts pressure on all wheels. They never spin out of control. Their agility and grip remains stable, even if you\'re in for a long spin. With the precision of a needle sensing the groove they rotate with an exact speed or rpm. It\'s like being in love with a selection of records: you get to enjoy them over and over again. You fall in love with their look and shape, similar to that first set of exclusive rims. You are right on track with the RP-102 Phono Stage.

Audia Flight Phono Phonostage


Audia Flight Phono MM / MC Phono Stage

After 2 years of developing Audia Flight is proud to introduce his new phono preamp. A separate power supply, the dedicate input preamplifier boards, the high gain (74dB in his maximum selection), the low noise are only few of his characteristic. Of course the separate power supply was choice to improve the shield of the preamp and to reduce to zero the vibrations and resonance from the transformers.

Pass Labs XP-17 Phonostage Preamplifier


XP17 uses the new-shielded low noise toroid and input filter module, like the XP-12. The power supply has an extra stage of RC filtering.  We have lower radiated and mechanical noise.

The XP17 has an all-new input circuit that is symmetrical and lower in noise and distortion with greater drive capability. Noise is the most prominent part of THD+N in the first section of a phono stage. By lowering noise we get better resolution and dynamics.

Pass Labs XP-27 Phonostage Preamplifier


The twin chassis XP-27 eclipses the already exceptional performance of the well-reviewed and well-received XP-15, XP-25 & XP-17: delivering enhanced RIAA performance at a fraction of the previous distortion.  The new design uses double shielded low noise toroidal transformers in external supply connected via aviation grade circular connectors using silver over oxygen free copper.

Pass Labs Xs Phono Preamplifier


The Xs Phono preamplifier represents an all-out assault on the state-of-art in Vinyl and the most intensive and difficult design effort made at Pass Laboratories. The final product of this massive effort extracts the utmost performance from a simple topology  and operates with the extremely small and delicate signals coming from today\'s wide variety of phono cartridges. The result is music that emerges from a quieter background and blooms into a richer, more precise soundstage.

Accuphase C-47 Stereo Phono Preamplifier

The C-47 is the first phono amplifier of this series which realizes a fully balanced configuration from input to output. The resulting product not only is highly impervious to external noise, it also features a dedicated head amplifier optimized for the characteristics of MC and MM phono cartridges, and a high-accuracy equalizer amplifier, thereby ensuring precise equalization with a minimum of noise. A set of newly added dedicated balanced MC phono inputs enables balanced connection to the analog record player. By bringing out the full performance potential of each phono cartridge, the C-47 delivers a rich and deeply satisfying musical experience.

Unison Research Phono One Valve Phono Stage


The original Phono One was one of the most popular Unison Research products in our history. Its production was discontinued a few years ago, but the requests to bring it back were overwhelming. That’s why we’ve introduced its return, with a new and improved design. The aesthetics of the Phono One is unchanged, however, maintaining the classic and timeless look of the original version. The Phono One, from its beginning, was designed for those who require a phono preamplifier that offers the highest possible sound quality.

Unison Research Simply Phono Valve Phono Stage


While phono preamps with valves are becoming increasingly common, not all of them offer stunning performance within their respective price classes. The Unison Research Simply Phono is simply that—an outstanding tubed phono stage that offers incredible performance for the price. The Simply Phono is also the most logical choice to match with Unison Research amplifiers, although it works perfectly in any quality hi-fi system.

Parasound Halo JC3 Jr Phono Preamplifier


If you\'re into vinyl records, then you\'ll discover that the Parasound Halo JC3 Jr. Phono Preamplifier is at the pinnacle of analogue audio technology and value engineering. Its “DNA” and circuit topologies are inspired by Parasound\'s acclaimed JC3 and JC3+ phono preamplifiers. The JC3 Jr. advances legendary designer John Curl’s reputation for designing legendary phono preamplifiers dating back to the 1970s.