Transrotor decided that it was time to design, create and build their own tonearm.

For Transrotor there was no lack of practical experience with the best tonearms in the world as well as relevant knowledge and access to the most modern production methods available. Transrotor wrote ease of use and simple adjustability at the top of the specification list.

The elaborate motor control allows a speed fine adjustment from 33 to 45 rpm. The connection for a motor is located on the back. The switch of the connected motor has no function: all settings are taken over by the Konstant Eins. The speed is fine-tuned with a screwdriver through the hole in the lid.

The Transrotor Konstant Studio power supply provides a decoupling of the interference potential of AC power and provides a very pure sound of your Transrotor turntable. The sophisticated engine management system allows a speed-vernier control of 33 to 45 rpm. The connection for an engine is located on the back.

This high-end power supply is an upgrade to Transrotor\'s turntables. It controls the motor, thus reducing wow. It also controls playback speed (33 and 45 RPM). Motor and platter rotation speed can be fine-tuned via two front-mounted triggers.
The benefit in terms of musicality is undeniable, delivering a smoother and more precise sound. The note ends are longer and cleaner.

Recommended to all of you who own a Transrotor turntable.

All new Transrotor X-chassis made of black 30mm POM material, platter POM black 60mm, Transrotor\'s balanced platter weight swing motion system using underhung mass, four height-adjustable polished aluminium feet, Zet-1 / 3 bearing base.

Chassis acrylic /aluminium sandwich base, 70mm 10kg aluminium platter acrylic top surface, motor unit mounted contact free from chassis, double synchronous motor with separate Konstant Studio power supply unit, Transrotor FMD magnetic bearing.

The Transrotor Fat Bob Reference TMD is a minimalist turntable purely built for sonics and simplicity. The massive base and platter is optimized to minimize resonance. It has a 4kg Transrotor magentic bearing thus magnetic drive. Fit, finish and technology that far surpasses its price.

The Transrotor Fat Bob S TMD is a minimalist turntable purely built for sonics and simplicity. The massive base and platter is optimized to minimize resonance. It has a 4kg Transrotor magentic bearing thus magnetic drive. Fit, finish and technology that far surpasses its price.

The heavy chassis, with 2 black acrylic carbonate discs enclosing a plate of polished aluminium, lies on adjustable spikes.
The feet under the spikes allow an optional hard or smooth coupling of the drive.

The 10 kg turntable is traditionally rotated from a full aluminium alloy. On its underside a wave profile provides for the suppression of unwanted material resonances.

The ZET 1 has a solid ground plate made out of Acrylate, a smooth plate disc bearing made of bronze and a plate disc out of metal with resonance dampening Acrylate-plating. 

The effective double synchrone motor is equipped with an external power supply.

The sound of the ZET is uniquely neutral. That means that nothing is added to the sound (bitingness or boredom). It\'s sound characteristics are mirrored in it\'s design appearance: a harmonic shape without any disruptive rough edges.

This table is eliciting equal raves whenever someone hears it at a show. The first time Transrotor has made a complete turntable out of the new material POM. POM has excellent resonance properties and leads to an elegant matte black look. The Dark Star Reference features a double Dark Star chassis set-up.

This table is eliciting equal raves whenever someone hears it at a show. The first time Transrotor has made a complete turntable out of the new material POM. POM has excellent resonance properties and leads to an elegant matte black look.

Chassis aluminium/ acrylic / aluminium sandwich base, 80mm 15kg aluminium platter acrylic top surface, 4 kg bearing bar, double synchronous motor, Transrotor TMD magnetic bearing. 

Also available as a DECK only

With its free magnetic drive that\'s normally only found on Transrotor turntables starting at the above mentioned price, this table is quieter, more engaging, more involving and more dynamic than anything even close to its price range. Nothing touches it for brilliance of its free magnetic drive. NO BELT between the platter bearing and the magnetic sub chassis, delivering contactless drive.

With its free magnetic drive that\'s normally only found on Transrotor turntables starting at the above mentioned price, this table is quieter, more engaging, more involving and more dynamic than anything even close to its price range. Nothing touches it for brilliance of its free magnetic drive. NO BELT between the platter bearing and the magnetic sub chassis, delivering contactless drive.

The Transrotor PHONO pre-amplifier brings detail of analog vinyl to full harmonious development. Signals from cartridges are fine and detailed pre-amplified. This is done with impressive dynamics and sonic quality.

This high-end power supply is an upgrade to Transrotor\'s turntables. It controls the motor, thus reducing wow. It also controls playback speed (33 and 45 RPM). Motor and platter rotation speed can be fine-tuned via two front-mounted triggers.
The benefit in terms of musicality is undeniable, delivering a smoother and more precise sound. The note ends are longer and cleaner.

Recommended to all of you who own a Transrotor turntable.

Chassis acryl base, 80mm 15kg aluminium platter acrylic top surface, 4 kg bearing bar, double synchronous motor with separate Konstant M-3 reference power supply unit, Transrotor FMD magnetic bearing.

Transrotor Tourbillon can be upgraded up to 2 separate tonearms.

Tourbillon FMD base includes: Konstant FMD reference PSU, Transrotor rotor ring aluminium stabilizer, platter weight aluminium and 2 Transrotor cleaning brushes and 2 design holders for cleaning cartridge needle and record.

The Transrotor PHONO Studio pre-amplifier brings detail of analog vinyl to full harmonious development. Signals from cartridges are fine and detailed pre-amplified. This is done with impressive dynamics and sonic quality.

This high-end power supply is an upgrade to Transrotor\'s turntables. It controls the motor, thus reducing wow. It also controls playback speed (33 and 45 RPM). Motor and platter rotation speed can be fine-tuned via two front-mounted triggers.
The benefit in terms of musicality is undeniable, delivering a smoother and more precise sound. The note ends are longer and cleaner.

Recommended to all of you who own a Transrotor turntable.